压电智能板结构的H∞振动控制

研究了压电智能板结构的H∞振动控制问题。先采用4节点矩形弯曲薄板单元(含12个位移自由度,2个电自由度)的有限元模型,利用Ham ilton原理得到了智能板结构的运动微分方程,然后综合运用模态截断法、最小实现法和平衡降阶法,对压电智能板结构的系统状态方程进行了降阶处理,得到了可观可控且低阶的近似状态方程,针对该降阶后的系统,利用H∞控制理论求解出能抑制干扰的动态输出反馈控制器,并将该控制器作用到降阶处理前的原系统中,从而能实现原系统抗干扰的振动控制。最后,以智能悬臂薄板结构为例,讨论了降阶过程中出现的一些问题和结论,并求出了相应的动态输出反馈控制器。仿真结果表明,文中的方法可实现压电智能板结构对干扰的抑制。     

Homotopy Solutions for a Generalized Second-Grade Fluid Past a Porous Plate

The flow of a second-grade fluid past a porous plate subject to either suction or blowing at the plate has been studied. A modified model of second-grade fluid that has shear-dependent viscosity and can predict the normal stress difference is used. The differential equations governing the flow are solved using homotopy analysis method (HAM). Expressions for the velocity have been constructed and discussed with the help of graphs. Analysis of the obtained results showed that the flow is appreciably influenced by the material and normal stress coefficient. Several results of interest are deduced as the particular cases of the presented analysis.     

圆板动力反直观行为实验研究

对受子弹正向撞击的铝合金圆板进行了动力反直观行为的实验研究。描述了不同撞击速度下板的响应模式,发现了圆板中的反直观现象,即板的最终变形与子弹撞击方向相反,并记录了板在整个变形过程中典型点的位移历史曲线,进一步证实了结构动力响应的反直观行为是一种客观存在的弹塑性动力行为。     

PROGRESSIVE FRAGMENT MODELING OF FAILURE WAVE IN CERAMICS UNDER PLANAR IMPACT LOADING

Polycrystalline ceramics have heterogeneous meso-structures which result in high singularity in stress distribution. Based on this, a progressive fragment model was proposed which describes the failure wave formation and propagation in shocked ceramics. The governing equation of the failure wave was characterized by inelastic bulk strain with material damage and fracture. And the inelastic bulk strain consists of dilatant strain from nucleation and expansion of microcracks and condensed strain from collapse of original pores. Numerical simulation of the free surface velocity was performed in good agreement with planar impact experiments on 92.93％ aluminas at China Academy of Engineering Physics. And the longitudinal, lateral and shear stress histories upon the arrival of the failure wave were predicted, which present the diminished shear strength and lost spall strength in the failed layer.     

Resonant flexural vibrations and dissipative heating of a piezoceramic ring plate with nonuniformly electroded surfaces

The forced flexural vibrations and dissipative heating of a bimorph ring plate are studied. The plate is made of viscoelastic piezoceramics and is polarized across the thickness. The outer surfaces of the plate are nonuniformly electroded, and harmonic electric excitation is applied to the electrodes. The viscoelastic behavior of the material is described using the concept of temperature-dependent complex moduli. The coupled nonlinear problem of thermoviscoelasticity is solved by time iteration using, at each iteration, the discrete-orthogonalization method to integrate the mechanics equations and the explicit finite-difference method to solve the heat-conduction equation with a nonlinear heat source. Numerical calculations demonstrate that by changing the size of the ring electrode we can influence the natural frequency, stress and displacement distributions, dissipative-heating temperature, and amplitude-and temperature-frequency characteristics. With certain boundary conditions, there is an optimal electrode configuration that produces deflections of maximum amplitudes when an electric excitation is applied __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 3, pp. 102–109, March 2006.     

FLEXURAL WAVE PROPAGATION IN NARROW MINDLIN''''S PLATE

Appling Mindlin's theory of thick plates and Hamilton system to propagation of elastic waves under free boundary condition, a solution of the problem was given. Dispersion equations of propagation mode of strip plates were deduced from eigenfunction expansion method. It was compared with the dispersion relation that was gained through solution of thick plate theory proposed by Mindlin. Based on the two kinds of theories, the dispersion curves show great difference in the region of short waves, and the cutoff frequencies are higher in Hamiltonian systems. However, the dispersion curves are almost the same in the region of long waves.     

Low Velocity Response Characteristics of Composite Plate with Embedded Shape Memory Alloy

I. INTRODUCTION Composite materials have been used extensively in aerospace and other industries owing to the factthat they have high speci?c modulus, high speci?c strength, and the capability to be designed andfabricated with greater ?exibility, and ha…     

非保守圆薄板的轴对称振动和稳定性

建立了受切向均布随从力作用的圆薄板在面内周边可移、不可移两种情况下的轴对称控制方程，用打靶法直接导出求解变系数常微分方程特征值问题数值解的计算式．通过数值计算，给出了周边可移、不可移的简支、固支圆板自振频率和临界载荷的特征曲线以及相应的临界发散载荷，并分析了泊松比对圆板自振频率和临界载荷的影响．     

Oblique Perforation of Thick Metallic Plates by Rigid Projectiles

Oblique perforation of thick metallic plates by rigid projectiles with various nose shapes is studied in this paper. Two perforation mechanisms, i.e., the hole enlargement for a sharp projectile nose and the plugging formation for a blunt projectile nose, are considered in the proposed analytical model. It is shown that the perforation of a thick plate is dominated by several non-dimensional numbers, i.e., the impact function, the geometry function of projectile, the non-dimensional thickness of target and the impact obliquity. Explicit formulae are obtained to predict the ballistic limit, residual velocity and directional change for the oblique perforation of thick metallic plates. The proposed model is able to predict the critical condition for the occurrence of ricochet. The proposed model is validated by comparing the predictions with other existing models and independent experimental data.The English text was polished by Keren Wang     

BENDING SOLUTION OF A RECTANGULAR PLATE WITH ONE EDGE BUILT－IN AND ONE CORNER POINT SUPPORTED SUBJECTED TO UNIFORM LOAD

ＢＥＮＤＩＮＧ　ＳＯＬＵＴＩＯＮ　ＯＦ　Ａ　ＲＥＣＴＡＮＧＵＬＡＲ　ＰＬＡＴＥ　ＷＩＴＨ　ＯＮＥ　ＥＤＧＥ　ＢＵＩＬＴ－ＩＮ　ＡＮＤ　ＯＮＥ　ＣＯＲＮＥＲ　ＰＯＩＮＴ　ＳＵＰＰＯＲＴＥＤ　ＳＵＢＪＥＣＴＥＤ　ＴＯ　ＵＮＩＦＯＲＭ　ＬＯＡＤＸｕＱｉｌｏ...